Precision incubator
Model INE 200

Standard equipment

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
• integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
  DELAYED ON
  HEATING UP
  HOLD or HOLD set-temperature-dependent with guaranteed holding time
  COOLING DOWN
• "Loop" function to repeat profile 1-99 times or endless
• digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
• resolution of display for set value and actual value 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• incl. works calibration certificate for +37 °C

Precision incubator
Model INB 500

Standard equipment

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
• one Pt100 sensor class A in 4-wire-circuit
• integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
• digital LED- display of set and actual temperature as well as remaining process time
• resolution of display for set value and actual value 0,5

Precision incubator
Model INB 400

Standard equipment

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
• one Pt100 sensor class A in 4-wire-circuit
• integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
• digital LED- display of set and actual temperature as well as remaining process time
• resolution of display for set value and actual value 0,5 °C

Precision incubator
Model INB 300

Standard equipment

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
• one Pt100 sensor class A in 4-wire-circuit
• integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
• digital LED- display of set and actual temperature as well as remaining process time
• resolution of display for set value and actual value 0,5 °C

Precision incubator
Model INB 200

Standard equipment

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• microprocessor PID-temperature controller with integrated autodiagnostic system with fault indicator
• one Pt100 sensor class A in 4-wire-circuit
• integrated digital timer (1 min. up to 99 h 59 min) to switch off heating to stand-by mode
• digital LED- display of set and actual temperature as well as remaining process time
• resolution of display for set value and actual value 0,5 °C

Overtemperature protection (double)

• in case of total breakdown of sensor, the heating is switched off at approx. 3 °C above set value
• in case of failure of the switching element, the heating will be controlled by an additional relay approx. 3 °C above the set temperature
• in case of a faulty sensor (incorrect measuring values) or the total breakdown of the controller the heating is switched off at approx. 10 °C above the max. oven temperature by the mechanical temperature limiter TB protection class 1
• for very sensitive and/or valuable load in terms of being non-reproducable, we recommend ovens of our E- and P-class guaranteeing an even higher safety standard

Universal oven "Paraffin Oven"
Model UNE 500 PA

Standard equipment

Control

• fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
• integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
  DELAYED ON
  HEATING UP
  HOLD or HOLD set-temperature-dependent with guaranteed holding time
  COOLING DOWN
• "Loop" function to repeat profile 1-99 times or endless
• digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
• resolution of display for set value: 0,5 °C
• resolution of display for actual value: 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• incl. works calibration certificate for +80 °C

Universal oven "Paraffin Oven"
Model UNE 400 PA

Standard equipment

Control

• fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
• integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
  DELAYED ON
  HEATING UP
  HOLD or HOLD set-temperature-dependent with guaranteed holding time
  COOLING DOWN
• "Loop" function to repeat profile 1-99 times or endless
• digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
• resolution of display for set value: 0,5 °C
• resolution of display for actual value: 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• incl. works calibration certificate for +80 °C

Universal oven "Paraffin Oven"
Model UNE 300 PA

Standard equipment

Control

• fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
• integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
  DELAYED ON
  HEATING UP
  HOLD or HOLD set-temperature-dependent with guaranteed holding time
  COOLING DOWN
• "Loop" function to repeat profile 1-99 times or endless
• digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
• resolution of display for set value: 0,5 °C
• resolution of display for actual value: 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• incl. works calibration certificate for +80 °C

Universal oven
Model UNP 800

Standard equipment

Ventilation and Control

• natural convection
• adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
• vent connection with restrictor flap
• adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
• autodiagnostic system with fault indication
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
• integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
• multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
  tempering profiles of up to 40 ramps
  time- and set-point dependent operation
  air flap adjustable in 10% steps
• digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
• resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• programme stored on power failure
• parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
• incl. works calibration certificate for +160 °C

Universal oven
Model UNP 700

Standard equipment

Ventilation and Control

• natural convection
• adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
• vent connection with restrictor flap
• adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
• autodiagnostic system with fault indication
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
• integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
• multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
  tempering profiles of up to 40 ramps
  time- and set-point dependent operation
  air flap adjustable in 10% steps
• digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
• resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• programme stored on power failure
• parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
• incl. works calibration certificate for +160 °C

Universal oven
Model UNP 600

Standard equipment

Ventilation and Control

• natural convection
• adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
• vent connection with restrictor flap
• adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
• autodiagnostic system with fault indication
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
• integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
• multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
  tempering profiles of up to 40 ramps
  time- and set-point dependent operation
  air flap adjustable in 10% steps
• digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
• resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• programme stored on power failure
• parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
• incl. works calibration certificate for +160 °C

Universal oven
Model UNP 550

Standard equipment

Ventilation and Control

• natural convection
• adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
• vent connection with restrictor flap
• adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
• autodiagnostic system with fault indication
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
• integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
• multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
  tempering profiles of up to 40 ramps
  time- and set-point dependent operation
  air flap adjustable in 10% steps
• digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
• resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• programme stored on power failure
• parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
• incl. works calibration certificate for +160 °C

Universal oven
Model UNP 500

Standard equipment

Ventilation and Control

• natural convection
• adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
• vent connection with restrictor flap
• adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
• autodiagnostic system with fault indication
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
• integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
• multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
  tempering profiles of up to 40 ramps
  time- and set-point dependent operation
  air flap adjustable in 10% steps
• digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
• resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• programme stored on power failure
• parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
• incl. works calibration certificate for +160 °C

Universal oven
Model UNP 400

Standard equipment

Ventilation and Control

• natural convection
• adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
• vent connection with restrictor flap
• adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
• autodiagnostic system with fault indication
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
• integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
• multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
  tempering profiles of up to 40 ramps
  time- and set-point dependent operation
  air flap adjustable in 10% steps
• digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
• resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• programme stored on power failure
• parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
• incl. works calibration certificate for +160 °C

Universal oven
Model UNP 300

Standard equipment

Ventilation and Control

• natural convection
• adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
• vent connection with restrictor flap
• adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
• autodiagnostic system with fault indication
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
• integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
• multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
  tempering profiles of up to 40 ramps
  time- and set-point dependent operation
  air flap adjustable in 10% steps
• digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
• resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• programme stored on power failure
• parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
• incl. works calibration certificate for +160 °C

Universal oven
Model UNP 200

Standard equipment

Ventilation and Control

• natural convection
• adjustment of pre-heated fresh air admixture by air flap through process controller in 10% steps for each segment individually
• vent connection with restrictor flap
• adaptive, fuzzy-supported, multifunctional, digital microprocessor PID-controller
• autodiagnostic system with fault indication
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or start of ramp operation
• integrated timer for tempering profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
• multifunctional programming via menu on 8-digit alphanumeric digital display (language to be chosen via set-up):
  tempering profiles of up to 40 ramps
  time- and set-point dependent operation
  air flap adjustable in 10% steps
• digital display (LED) of all set parameters, such as temperature, weekdays, time, air flap position, programme status and set-up values
• resolution of display for set value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C; for actual value 0,1 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• programme stored on power failure
• parallel printer interface (incl. real-time clock with date function) for printing logging files, suitable all PCL3-compatible ink-jet printers (USB available via converter, see accessories)
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
• incl. works calibration certificate for +160 °C

Universal oven
Model UNE 800

Standard equipment

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
• integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
  DELAYED ON
  HEATING UP
  HOLD or HOLD set-temperature-dependent with guaranteed holding time
  COOLING DOWN
• "Loop" function to repeat profile 1-99 times or endless
• digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
• resolution of display for set value 0,5 °C; for actual value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• incl. works calibration certificate for +160 °C

Universal oven
Model UNE 700

Standard equipment

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
• integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
  DELAYED ON
  HEATING UP
  HOLD or HOLD set-temperature-dependent with guaranteed holding time
  COOLING DOWN
• "Loop" function to repeat profile 1-99 times or endless
• digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
• resolution of display for set value 0,5 °C; for actual value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• incl. works calibration certificate for +160 °C

Universal oven
Model UNE 600

Standard equipment

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
• integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
  DELAYED ON
  HEATING UP
  HOLD or HOLD set-temperature-dependent with guaranteed holding time
  COOLING DOWN
• "Loop" function to repeat profile 1-99 times or endless
• digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
• resolution of display for set value 0,5 °C; for actual value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• incl. works calibration certificate for +160 °C

Universal oven
Model UNE 550

Standard equipment

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
• integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
  DELAYED ON
  HEATING UP
  HOLD or HOLD set-temperature-dependent with guaranteed holding time
  COOLING DOWN
• "Loop" function to repeat profile 1-99 times or endless
• digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
• resolution of display for set value 0,5 °C; for actual value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• incl. works calibration certificate for +160 °C

Universal oven
Model UNE 500

Standard equipment

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
• integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
  DELAYED ON
  HEATING UP
  HOLD or HOLD set-temperature-dependent with guaranteed holding time
  COOLING DOWN
• "Loop" function to repeat profile 1-99 times or endless
• digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
• resolution of display for set value 0,5 °C; for actual value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• incl. works calibration certificate for +160 °C

Universal oven
Model UNE 400

Standard equipment

Ventilation and Control

• natural convection
• continuous adjustment of pre-heated fresh air admixture
• vent connection with restrictor flap
• fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication
• solid state switching unit
• 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
• digital 7-day-programme-timer with real time clock, precise minute setting, for one set value or ramp operation in combination with:
• integrated digital timer for tempering profile with max. 4 segments, each segment adjustable from 1 min to 999 hours:
  DELAYED ON
  HEATING UP
  HOLD or HOLD set-temperature-dependent with guaranteed holding time
  COOLING DOWN
• "Loop" function to repeat profile 1-99 times or endless
• digital display (LED) of all set parameters, such as temperature, weekdays, time, programme status and set-up values
• resolution of display for set value 0,5 °C; for actual value 0,1 °C below 99,9 °C, 0,5 °C above 100 °C
• long-term logging (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
• serial interface RS 232 including MEMMERT Software "Celsius" for programming and documentation
• incl. works calibration certificate for +160 °C